AEG Washer L 60060 TL User Manual

EN WASHING MACHINE  
USER MANUAL  
L 60260 TL  
L 60060 TL  
 
ENGLISH  
3
FOR PERFECT RESULTS  
Thank you for choosing this AEG product. We have created it to give you  
impeccable performance for many years, with innovative technologies that help  
make life simpler – features you might not find on ordinary appliances. Please spend  
a few minutes reading to get the very best from it.  
ACCESSORIES AND CONSUMABLES  
In the AEG webshop, you’ll find everything you need to keep all your AEG  
appliances looking spotless and working perfectly. Along with a wide range of  
accessories designed and built to the high quality standards you would expect, from  
specialist cookware to cutlery baskets, from bottle holders to delicate laundry bags…  
Visit the webshop at:  
CUSTOMER CARE AND SERVICE  
We recommend the use of original spare parts.  
When contacting Service, ensure that you have the following data available. The  
information can be found on the rating plate.  
Model  
PNC  
Serial Number  
 
4
SAFETY INFORMATION  
Before the installation and use, read this  
manual carefully:  
sharp material can cause damage to  
the appliance.  
• For your safety and the safety of your  
property  
• To help the environment  
• For the correct operation of the appli-  
ance.  
Always keep these instructions with the  
appliance also if you move or give it to a  
different person.  
• Do not touch the glass of the door  
while a programme operates. The glass  
can be hot (only for front-loading appli-  
ances).  
CARE AND CLEANING  
• Deactivate the appliance and discon-  
nect the mains plug from the mains  
socket.  
• Do not use the appliance without the  
filters. Make sure that the installation of  
the filters is correct. An incorrect instal-  
lation causes water leakages.  
The manufacturer is not responsible if an  
incorrect installation and use causes dam-  
age.  
CHILDREN AND VULNERABLE  
PERSON SAFETY  
INSTALLATION  
• Do not let persons, children included,  
with reduced physical sensory, reduced  
mental functions or lack of experience  
and knowledge use the appliance. They  
must have supervision or instruction for  
the operation of the appliance by a per-  
son who is responsible for their safety.  
• Keep all packaging away from children.  
There is the risk of suffocation or injury.  
• Keep all detergents away from children.  
• Keep children and pets away from the  
appliance when the door is open.  
• Before you close the appliance door,  
make sure that children and pets are  
not into the drum.  
• The appliance is heavy, be careful when  
you move it.  
• Do not transport your appliance with-  
out the transit bolts, you can damage  
internal components and cause leak-  
ages or malfunctions.  
• Do not install and connect a damaged  
appliance.  
• Make sure to remove all packaging and  
transport bolts.  
• Make sure that the mains plug is dis-  
connected from the mains socket dur-  
ing installation.  
• Only a qualified person must do the  
electrical installation, the plumbing and  
the installation of the appliance. This to  
prevent the risks of structural damage  
or injury.  
GENERAL SAFETY  
• Do not use the appliance for professio-  
nal use. The appliance is only for do-  
mestic use.  
• Do not change the specifications of this  
appliance. There is the risk of injury and  
damage to the appliance.  
• Do not put flammable products or  
items that are wet with flammable  
products in, near or on the appliance.  
Risk of explosion or fire.  
• Do not install or use the appliance  
where the temperature is less than 0 °C.  
• When you install the appliance on a  
carpet floor, make sure that there is air  
circulation between the appliance and  
the carpet. Adjust the feet to have the  
necessary space between the appliance  
and the carpet.  
• Obey the safety instructions on the de-  
tergent packaging to prevent burns to  
eyes, mouth and throat.  
• Make sure that you remove all metal  
objects from the laundry. Hard and  
Water connection  
• Do not connect the appliance with old  
hoses already used. Only use new ho-  
ses.  
 
ENGLISH  
5
• Make sure not to cause damage to the  
water hoses.  
• Do not connect the appliance to new  
pipes or pipes not used for a long time.  
Let the water flow for some minutes,  
then connect the inlet hose.  
• The first time you use the appliance,  
make sure that the water hoses and the  
couplings do not have leakages.  
Electrical connection  
• Make sure that the appliance is earth-  
ed.  
• Make sure that the electrical informa-  
tion on the rating plate agrees with the  
power supply.  
• Always use a correctly installed shock-  
proof socket.  
• Do not use multiple plugs and exten-  
sion cables. There is a risk of fire.  
• Do not replace or change the mains ca-  
ble. Contact the service centre.  
• Make sure not to cause damage to the  
mains plug and cable.  
• Connect the mains plug to the mains  
socket only at the end of the installa-  
tion. Make sure that there is access to  
the mains plug after the installation.  
• Do not pull the mains cable to discon-  
nect the appliance. Always pull the  
mains plug.  
DISCARD THE APPLIANCE  
1.  
Disconnect the mains plug from the  
mains socket.  
2.  
3.  
Cut off the mains cable and discard it.  
Discard the door catch. This prevents  
children or pets to be closed in the  
appliance. There is a risk of suffoca-  
tion (only for front-loading applian-  
ces).  
 
6
PRODUCT DESCRIPTION  
7
8
9
1
2
3
10  
11  
12  
4
5
6
Control panel  
Lid  
Rating plate  
Mains cable  
1
2
3
4
5
6
7
8
Lid handle  
Water inlet valve  
Water drain hose  
Transit bolts  
9
Filter access door  
10  
11  
12  
Lever to move the appliance  
Adjustable feet  
Feet for the appliance level  
ACCESSORIES  
Plastic cap  
1
1
2
3
To close the hole on the rear side of  
the cabinet, after the removal of the  
transit bolt.  
Plastic hose guide  
2
3
To connect the drain hose on the  
edge of a sink.  
Anti-flood inlet hose  
To prevent possible leakage.  
 
ENGLISH  
7
CONTROL PANEL  
1
2
3
9
8
7
6
5
4
On/Off button  
Programme knob  
Display  
1
2
3
4
6
Time saving button  
Extra rinse button  
Spin button  
7
8
9
Start/Pause button  
Delay start button  
5
Temperature button  
1
Press button  
ance again.  
to activate the appli-  
1
ON OFF BUTTON  
Press this button to activate or deactivate  
the appliance. A tune sounds when the  
appliance is activated.  
The AUTO Stand-by function automatical-  
ly deactivates the appliance to decrease  
the energy consumption when:  
– Set again the washing programme  
and all possible options.  
• After 5 minutes from the end of the  
washing programme. Refer to 'At the  
end of programme'.  
• You do not use the appliance for 5 mi-  
2
PROGRAMME KNOB  
4
nutes before you press button  
.
– All settings are cancelled.  
Turn this knob to set a programme.  
3
DISPLAY  
A
B
C
 
8
The display shows:  
A
• The programme time  
When the programme starts, the time decreases with steps of 1 minute.  
• The delay start  
When you press the delay start button, the display shows the delay start  
time.  
• Alarm codes  
If the appliance has a malfunction, the display shows alarm codes. Refer  
to 'Troubleshooting' chapter.  
• Err  
The display shows this message for some seconds if:  
– You set a function that is not applicable for the programme.  
– You change the programme while it operates.  
4
The indicator of the Start/Pause button  
flashes.  
When the programme is completed.  
Door lock  
B
C
You cannot open the appliance door when the symbol is on.  
You can open the door only when the symbol goes off.  
If the programme is completed but the symbol stays on:  
• There is water in the drum.  
• The 'Rinse Hold' function is on.  
The child lock symbol  
The symbol comes on when you activate this device.  
4
7
START/PAUSE BUTTON  
EXTRA RINSE BUTTON  
4
7
Press button  
programme.  
to start or interrupt a  
Press button  
a programme.  
to add rinsing phases to  
Use this function for persons allergic to  
detergents and in areas where the water  
is soft.  
5
DELAY START BUTTON  
5
Press button  
to delay the start of a  
programme from 30 minutes to 20 hours.  
8
SPIN BUTTON  
Press this button to:  
• Decrease the maximum speed of the  
spin phase of the programme.  
• Activate the 'Rinse Hold' function. Set  
this function to prevent fabric creases.  
The appliance does not drain the water  
when the programme is completed.  
6
TIME SAVE BUTTON  
6
Press the button  
gramme duration.  
to decrease the pro-  
• Press one time to set 'Shortened dura-  
tion' for items with daily soil.  
• Press two times to set 'Extra Quick' for  
items with almost no soil.  
'Rinse Hold' function is  
on.  
Some programmes accept only  
one of the two functions.  
 
ENGLISH  
9
9
TEMPERATURE BUTTON  
9
Press button  
temperature.  
to change the default  
CHILD LOCK FUNCTION  
This function prevents children to play  
with the control panel.  
• To activate the function, press button  
6
7
and button  
til the display shows the symbol  
• To deactivate the function, press but-  
at the same time un-  
.
6
7
ton  
and button  
at the same time  
goes off.  
until the symbol  
You can activate the function:  
• Before you press the Start/Pause but-  
4
ton  
: the appliance cannot start.  
• After you press the Start/Pause button  
4
, all the buttons and the programme  
knob are deactivated.  
PERMANENT EXTRA RINSE  
FUNCTION  
With this function you can keep the extra  
rinse function permanently on when you  
set a new programme.  
• To activate the function press button  
5
6
and button  
til the indicator of button  
• To deactivate the function press button  
at the same time un-  
7
is on.  
5
6
and button  
at the same time un-  
7
til the indicator of button  
is off.  
 
10  
WASHING PROGRAMMES  
Programme  
Temperature  
Type of load  
Cycle  
Functions  
max. weight of load description  
White and coloured  
cotton with normal  
soil.  
Wash  
SPIN REDUCTION  
RINSE HOLD  
Rinses  
Cottons  
95° - Cold  
Long spin  
EXTRA RINSE  
1)  
max. 6 kg  
TIME SAVE  
White and coloured  
Prewash  
SPIN REDUCTION  
RINSE HOLD  
cotton with heavy soil. Wash  
Cottons + Pre-  
wash  
95° - Cold  
max. 6 kg  
Rinses  
Long spin  
EXTRA RINSE  
1)  
TIME SAVE  
White and coloured  
Wash  
SPIN REDUCTION  
RINSE HOLD  
cotton with heavy soil. Rinses  
Cottons + Stain  
95° - 40°  
max. 6 kg  
Long spin  
EXTRA RINSE  
1)  
TIME SAVE  
Synthetic or mixed  
Wash  
SPIN REDUCTION  
RINSE HOLD  
fabric items with nor- Rinses  
Synthetics  
60° - Cold  
mal level of soil.  
max. 2,5 kg  
Short spin  
EXTRA RINSE  
1)  
TIME SAVE  
Synthetic fabric items Wash  
SPIN REDUCTION  
RINSE HOLD  
with normal soil.  
max. 1 kg  
Rinses  
2)  
Easy Iron  
Short spin  
EXTRA RINSE  
60° - Cold  
1)  
TIME SAVE  
Delicate fabrics as  
Wash  
SPIN REDUCTION  
RINSE HOLD  
acrylics, viscose, poly- Rinses  
Delicates  
40° - Cold  
ester items with nor-  
mal soil.  
max. 2,5 kg  
Short spin  
EXTRA RINSE  
1)  
TIME SAVE  
Machine washable  
Wash  
SPIN REDUCTION  
RINSE HOLD  
wool. Hand washable Rinses  
Wool  
40° - Cold  
wool and delicate  
fabrics with «hand  
washing» care sym-  
bol.  
Short spin  
max. 1 kg  
All fabrics  
Drainage of the  
SPIN REDUCTION  
The maximum load of water  
3)  
Spin  
the laundry is related Spin phase at the  
to the type of laundry. maximum speed.  
All fabrics  
Drainage of the  
The maximum load of water  
the laundry is related  
to the type of laundry.  
Drain  
All fabrics.  
One rinse with ad- SPIN REDUCTION  
ditive spin phase  
RINSE HOLD  
Rinse  
4)  
EXTRA RINSE  
 
ENGLISH  
11  
Programme  
Temperature  
Type of load  
Cycle  
Functions  
max. weight of load description  
Set this programme  
to wash curtains. It  
adds automatically  
the prewash phase to Short spin  
clean the dust from  
the curtains.  
Prewash  
Wash  
SPIN REDUCTION  
RINSE HOLD  
EXTRA RINSE  
Curtains  
40° - Cold  
Rinses  
Do not put the deter-  
gent into the prewash  
compartment.  
max. 2,5 kg  
All items in jeans. Jer- Wash  
SPIN REDUCTION  
RINSE HOLD  
sey made items with  
hi-tech materials.  
max.3 kg  
Rinses  
Jeans  
60° - Cold  
Short spin  
EXTRA RINSE  
1)  
TIME SAVE  
20 Min. - 3 kg  
40° - 30°  
Cotton and synthetic Wash  
items with light soil or Rinses  
SPIN REDUCTION  
worn only one time.  
Short spin  
White and fast col-  
oured cotton with  
normal soil.  
Wash  
SPIN REDUCTION  
RINSE HOLD  
ECO  
Economy  
60° - 40°  
Rinses  
5)  
Long spin  
EXTRA RINSE  
1)  
max. 6 kg  
TIME SAVE  
1)  
if you press the button 6 two times (Extra Quick duration), we recommend that you  
decrease the quantity of the load. It is possible to load fully the appliance, however the  
washing results are reduced.  
2)  
3)  
4)  
5)  
The wash and spin phase is soft to prevent the creases of the laundry. The appliance adds  
some rinses.  
The default phase of the spin speed is related to cotton items. Set the spin speed. Make  
sure that it agrees with the laundry.  
Press EXTRA RINSE button to add rinses. With a low spin speed the appliance performs  
delicate rinses and a short spin.  
Set this programme to have a good washing results and decrease the energy consumption.  
The time of the washing programme is extended. For cotton economy programmes you  
can set only the Extra Quick duration.  
CONSUMPTION VALUES  
1)  
Energy consump-  
Water consump-  
tion (litre)  
Programme  
2)  
2)  
tion (KWh)  
Cottons 90°C  
2.00  
2.20  
2.20  
0.85  
0.50  
0.50  
0.50  
55  
65  
65  
44  
55  
48  
50  
Cottons + Prewash 90°C  
Cottons + Stain 90°C  
Synthetics 60°C  
Easy iron 60°C  
Delicates 40°C  
Wool 40°C  
 
12  
1)  
Programme  
Energy consump-  
Water consump-  
tion (litre)  
2)  
2)  
tion (KWh)  
Spin  
0.05  
0.01  
0.10  
0.60  
0.90  
0.35  
1.80  
/
Drain  
Rinse  
/
35  
60  
55  
50  
55  
Curtains 40°C  
Jeans 60°C  
20 min. 3 kg 30°C  
Economy 90°C  
Programmes for energy saving  
3)  
1.02  
0.70  
52  
55  
Economy 60°C  
3)  
Economy 40°C  
The cotton 60 °C economy and cotton 40 °C economy are the standard  
cotton programmes for normally soiled cotton laundry. They are suitable  
to clean normally soiled cotton laundry and they are the most efficient  
programmes in terms of combined energy and water consumption for  
washing that type of cotton laundry. The actual water temperature may  
differ from the declared cycle temperature.  
1)  
2)  
Refer to the display for the programme time.  
The consumption information shown in this chart is indicative. It can vary depending on the  
quantity and the type of laundry, on the temperature of the water supply and on the  
ambient temperature.  
3)  
This is the programme for test institutes. It agrees with EN60456.  
BEFORE FIRST USE  
Put a small quantity of detergent in the  
main wash compartment of the detergent  
dispenser. Set and start a programme for  
cotton at the highest temperature without  
laundry. This removes all possible dirt  
from the drum and the tub.  
USING THE APPLIANCE  
1.  
2.  
Open the water tap.  
Connect the mains plug to the mains  
socket.  
3.  
1
Press button  
ance.  
to activate the appli-  
4.  
5.  
Put the laundry in the appliance.  
Use the correct quantity of detergent  
and additives.  
6.  
Set and start the correct programme  
for the type of laundry and soil.  
 
ENGLISH  
13  
LOADING THE LAUNDRY  
2.  
Push the button A (depending on  
model). The drum opens automatical-  
ly.  
3.  
4.  
Put the laundry. Make sure to not put  
too much laundry into the drum.  
Close the drum and the lid of your  
washing machine.  
Before you close the lid of your  
appliance, make sure that you  
close the drum correctly.  
A
1.  
Open the lid of the appliance.  
FILLING THE DETERGENT AND ADDITIVES  
The detergent compartment for the prewash phase.  
The detergent compartment for the washing phase.  
Liquid additives compartment (fabric conditioner, starch).  
M
The mark  
is the maximum level for the quantity liquid additives.  
Always obey the instructions that  
you find on the packaging of the  
detergent products.  
 
14  
SETTING AND STARTING A PROGRAMME  
1.  
2.  
Turn the programme knob.  
When the countdown is completed,  
the programme starts automatically.  
4
The indicator of button  
with red colour.  
flashes  
4
Before you press button  
to  
3.  
4.  
The indicators of the default tempera-  
ture and spin speed come on. To  
change the temperature and/or the  
spin speed, press the related buttons.  
Set the available functions and the  
delay start. When you press the rele-  
vant button, the indicator of the set  
function comes on or the display  
shows the related symbol.  
start the appliance, you can cancel  
or change the set of the delay  
start.  
You cannot set the delay start with  
the Steam programme.  
CANCEL THE DELAY START  
1.  
4
Press button  
tor flashes.  
. The related indica-  
5.  
4
Press button  
to start the pro-  
2.  
3.  
4
5
gramme. The indicator of button  
is on with red colour.  
Press button  
again and again until  
the display shows 0’.  
4
Press button  
starts.  
. The programme  
INTERRUPT A PROGRAMME  
1.  
4
Press button  
es.  
. The indicator flash-  
OPEN THE LID  
2.  
While a programme or the delay start op-  
erates, the lid is locked.  
4
Press button  
again. The washing  
programme continues.  
To open the lid:  
CANCEL A PROGRAMME  
1.  
4
Press button  
. You can open the  
lid 2 minutes after the appliance  
stops. The door lock symbol in the  
display goes off.  
1.  
1
Press button  
to cancel the pro-  
gramme and to deactivate the appli-  
ance.  
2.  
3.  
Open the lid.  
2.  
1
Press button  
again to activate the  
4
Close the lid and press button  
The programme or the delay start  
continues.  
.
appliance. Now, you can set a new  
washing programme.  
The appliance does not drain the  
water.  
If the temperature and level of the  
water in the drum are too high,  
the door lock symbol stays on and  
you cannot open the lid . If neces-  
sary, do the following procedure  
to open the lid.  
CHANGE A FUNCTION  
You can change only some functions be-  
fore they operate.  
1.  
2.  
3.  
Deactivate the appliance.  
Wait for some minutes.  
Make sure that there is no wa-  
ter in the drum.  
1.  
4
Press button  
es.  
. The indicator flash-  
2.  
Change the function set.  
SET THE DELAY START  
If you deactivate the appliance, it  
is necessary to set the programme  
again.  
1.  
5
Press button  
again and again until  
the display shows the number of mi-  
nutes or hours.  
2.  
4
Press button  
, the appliance starts  
the countdown of the delay start.  
 
ENGLISH  
15  
AT THE END OF PROGRAMME  
• The appliance stops automatically.  
• The acoustic signals operate.  
• Close the water tap.  
The washing programme is completed,  
but the 'Rinse Hold' function is on:  
– The drum turns regularly to prevent the  
creases in the laundry.  
– The door stays locked.  
In the display  
comes on.  
• The indicator of the Start/Pause button  
4
goes off.  
• You can open the lid 2 minutes after  
the appliance stops. The door lock sym-  
bol goes off.  
– You must drain the water to open the  
door.  
To drain the water:  
1
Press button  
to deactivate the ap-  
1.  
2.  
If necessary, decrease the spin speed.  
pliance. After five minutes from the end  
of the programme, the AUTO OFF  
function automatically deactivates the  
appliance.  
4
Press the Start/Pause button  
appliance drains the water and spins.  
. The  
3.  
4.  
When the programme is completed  
and the door lock symbol goes off,  
you can open the door  
When you activate the appliance  
again, the display shows the end  
of the last set programme. Turn  
the programme knob to set a new  
cycle.  
Deactivate the appliance.  
The appliance drains and spins  
automatically after approximately  
18 hours.  
• Remove the laundry from the appli-  
ance. Make sure that the drum is emp-  
ty.  
• Keep the door ajar, to prevent mildew  
and odours.  
HELPFUL HINTS AND TIPS  
• Do not wash in the appliance :  
– Laundry without hems or with cuts  
– Underwired bras.  
– Use a washing bag to wash small  
items.  
• A very small load can cause balance  
problems with the spin phase. If this oc-  
curs, adjust manually the items in the  
tub and start the spin phase again.  
THE LAUNDRY LOAD  
• Divide the laundry in: white, coloured,  
synthetics, delicates and wool.  
• Obey the washing instructions that are  
on the laundry care labels.  
• Do not wash together white and col-  
oured items.  
• Some coloured items can discolour with  
the first wash. We recommend that you  
wash them separately for the first times.  
• Button up pillowcases, close zippers,  
hooks and poppers. Tie up belts.  
• Empty the pockets and unfold the  
items.  
• Turn inside out multilayered fabrics,  
wool and items with painted illustra-  
tions.  
STUBBORN STAINS  
For some stains, water and detergent is  
not sufficient.  
We recommend that you remove these  
stains before you put the items in the ap-  
pliance.  
Special stain removers are available. Use  
the special stain remover that is applica-  
ble to the type of stain and fabric.  
• Remove hard stains.  
• Wash with a special detergent heavy  
soil stains.  
• Be careful with the curtains. Remove  
the hooks or put the curtains in a wash-  
ing bag or pillowcase.  
DETERGENTS AND ADDITIVES  
• Only use detergents and additives spe-  
cially made for washing machines.  
 
16  
• Do not mix different types of deter-  
• If necessary, use a stain remover when  
you set a programme with a low tem-  
perature.  
• To use the correct quantity of the de-  
tergent, check the water hardness of  
your domestic system  
gents.  
• To help the environment, do not use  
more than the correct quantity of deter-  
gent.  
• Obey the instructions that you find on  
the on packaging of these products.  
WATER HARDNESS  
• Use the correct products for the type  
and colour of the fabric, the pro-  
gramme temperature and the level of  
soil.  
• If you use liquid detergents, do not set  
the prewash phase.  
• If your appliance has not the detergent  
dispenser with the flap device, add the  
liquid detergents with a dosing ball.  
If the water hardness in your area is high  
or moderate, we recommend that you use  
a water softener for washing machines. In  
areas where the water hardness is soft it is  
not necessary to use a water softener.  
To know the water hardness in your area,  
contact your local water authority.  
Obey the instructions that you find on the  
packaging of the products.  
Equivalent scales measure the water hard-  
ness:  
• German degrees (°dH).  
• French degrees (°TH).  
• mmol/l (millimol for each litre - interna-  
tional unit for the hardness of water).  
• Clarke degrees.  
ECOLOGICAL HINTS  
To help the environment, use less water  
and energy, obey these instructions:  
• Set a programme without the prewash  
phase to wash laundry with normal soil.  
• Always start a washing programme with  
the maximum load of laundry.  
Water hardness table  
Water hardness  
Level  
Type  
°dH  
0-7  
°T.H.  
0-15  
mmol/l  
0-1.5  
Clarke  
0-9  
1
2
3
4
soft  
medium  
hard  
8-14  
15-21  
> 21  
16-25  
26-37  
> 37  
1.6-2.5  
2.6-3.7  
>3.7  
10-16  
17-25  
>25  
very hard  
 
ENGLISH  
17  
CARE AND CLEANING  
WARNING!  
CAUTION!  
Do not use alcohol, solvents or  
chemical products.  
Disconnect the appliance from the mains  
supply before you clean it.  
MAINTENANCE WASH  
With the low temperature programmes it  
is possible that some detergent stays in  
the drum. Make regularly a maintenance  
wash. To do this:  
• Empty the laundry from the drum.  
• Set the hottest cotton wash programme  
• Use a correct quantity of powder deter-  
gent with biological properties.  
After each wash, keep the door open for a  
while to prevent mould and to let un-  
pleasant smells go out.  
DESCALING  
The water we use contains limescale. If it  
becomes necessary, use a water softener  
to remove limescales.  
Use a special product made for washing  
machines. Obey the instructions that you  
find on the packaging of the manufactur-  
er.  
Do this separately from the laundry wash.  
EXTERNAL CLEANING  
Clean the appliance only with soap and  
warm water. Fully dry all the surfaces.  
DETERGENT DISPENSER  
To clean the dispenser:  
1.  
Remove the detergent dispenser and  
disconnect the two parts.  
2.  
3.  
Clean all the parts with water.  
Assemble the two parts of the deter-  
gent dispenser.  
4.  
Put back the detergent dispenser.  
WARNING!  
• Disconnect the mains plug from  
the mains socket.  
• Do not remove the filter while  
the appliance operates. Do not  
clean the drain filter if the water  
in the appliance is hot. The wa-  
ter must be cold before you  
clean the drain filter.  
DRAIN FILTER  
Regularly examine the drain filter  
and make sure that it is clean.  
To clean the drain filter:  
 
18  
1.  
Open the drain filter door.  
2.  
Put a container below the recess of  
the drain filter to collect the water  
that flows out. Turn the filter until it is  
vertical.  
3.  
4.  
5.  
6.  
7.  
Turn the filter fully and remove it.  
Remove fluff and objects.  
Clean the filter with water.  
Put it back and screw it in.  
Make sure that you tighten correctly  
the filter to prevent leakages.  
8.  
Close the drain filter door.  
THE INLET HOSE FILTER AND  
THE VALVE FILTER  
WARNING!  
• Disconnect the mains plug from  
the mains socket.  
To clean the water inlet filters:  
1.  
2.  
Close the water tap.  
Remove the water inlet hose from the  
water tap.  
3.  
Clean the filter in the inlet hose with a  
stiff brush.  
 
ENGLISH  
19  
4.  
5.  
Remove the inlet hose behind the  
appliance.  
Clean the filter in the valve with a stiff  
brush or a towel.  
6.  
7.  
Install again the inlet hose. Make sure  
that the couplings are tight to pre-  
vent leakages.  
Open the water tap.  
90˚  
5.  
Disconnect the appliance.  
EMERGENCY DRAIN  
WARNING!  
Because of a malfunction, the appliance  
cannot drain the water.  
If this occurs, do steps (1) through (3) of  
'To clean the drain filter'.  
If necessary, clean the filter.  
Put the drainage duct back and close the  
drain filter flap.  
Make sure that the temperature is  
more than 0 °C before you use the  
appliance again.  
The manufacturer is not responsi-  
ble for damages caused by low  
temperatures.  
FROST PRECAUTIONS  
If the appliance is installed in an area  
where the temperature can be less than 0  
°C, remove the remaining water from the  
inlet hose and the drain pump.  
1.  
Close the water tap and disconnect  
the inlet hose.  
2.  
Put the end of the inlet hose in a con-  
tainer and let the water flow out of  
the hose.  
3.  
4.  
Do the Drain programme and let it  
operate until the end of the cycle.  
Turn the programme knob to Stop to  
disconnect the appliance from the  
power supply.  
 
20  
TROUBLESHOOTING  
The start of the appliance does not occur  
- The appliance does not drain  
the water.  
or it stops during operation.  
First try to find a solution to the problem  
(refer to the table). If not, contact the serv-  
ice centre.  
- The appliance door is open or  
not closed correctly.  
- The anti-flood device is on.  
With some problems, the acoustic  
signals operate and the display shows  
an alarm code:  
WARNING!  
Deactivate the appliance before  
you do the checks.  
- The appliance does not fill with  
water.  
Problem  
Possible cause  
Possible solution  
The appliance  
does not fill with  
water.  
The water tap is closed.  
Open the water tap.  
The water inlet hose is  
damaged.  
Make sure that the water inlet  
hose has no damages.  
The filters in the water in- Clean the filters. Refer to 'Care  
let hose is blocked . and cleaning'.  
The water tap is blocked Clean the water tap.  
or is furred with lime-  
scale.  
The connection of the  
water inlet hose is not  
correct.  
Make sure that the connection is  
correct.  
The water pressure is too Contact your local water authori-  
low.  
ty.  
The appliance  
does not drain the damaged.  
water.  
The water drain hose is  
Make sure that the water drain  
hose has no damages.  
The filter of the drain  
pump is blocked.  
Clean the filter of the drain  
pump. Refer to 'Care and clean-  
ing'.  
The connection of the  
water drain hose is not  
correct.  
Make sure that the connection is  
correct.  
A washing programme  
without the drain phase  
is set.  
Set the drain programme.  
The function Rinse &  
Hold is on.  
Set the drain programme.  
Close the door correctly.  
The appliance  
door is open or  
not closed correct-  
ly.  
 
ENGLISH  
21  
Problem  
Possible cause  
Possible solution  
The anti-flood de-  
vice is on.  
• Disconnect the appliance.  
• Close the water tap.  
• Contact the service centre.  
The spin phase  
does not operate.  
The spin phase is off.  
Set the spin programme.  
The filter of the drain  
pump is blocked.  
Clean the filter of the drain  
pump. Refer to 'Care and clean-  
ing'.  
Balance problems with  
the laundry load.  
Adjust manually the items in the  
tub and start the spin phase  
again.  
The programme  
does not start.  
The mains plug is not  
connected in the mains  
socket.  
Put in the mains plug.  
Blow out fuse in the  
household fuse box.  
Replace the fuse.  
You did not press button  
4
Press button  
.
4
.
The delay start is set.  
To start immediately the pro-  
gramme, cancel the delay start.  
The Child Lock function  
is activated.  
Deactivate the Child Lock func-  
tion.  
There is water on  
the floor.  
Leakages from the cou-  
plings of the water ho-  
ses.  
Make sure that the couplings are  
tight.  
Leakages from the drain Make sure that the drain pump  
pump.  
filter is tight.  
The water drain hose is  
damaged.  
Make sure that the water inlet  
hose has no damages.  
You cannot open  
the appliance  
door.  
The washing programme Let the washing programme end.  
is in operation.  
There is water in the  
drum.  
Set the drain or the spin pro-  
gramme.  
The appliance  
makes an unusual pliance.  
noise.  
Incorrect level of the ap- Adjust the level of the appliance.  
Refer to 'Installation'.  
You did not remove the  
packaging and/or the  
transit bolts.  
Remove the packaging and/or  
the transit bolts. Refer to 'Instal-  
lation'.  
The load is very small.  
Add more laundry in the drum.  
 
22  
Problem  
Possible cause  
Possible solution  
The appliance fills The end of the drain  
Make sure that the drain hose is  
in the correct position.  
with water and  
hose is too low.  
drain immediately.  
The washing re-  
The detergent you used Increase the detergent quantity  
sults are not satis- was not sufficient or cor- or use a different one.  
factory.  
rect.  
You did not remove the  
stubborn stains before  
you wash the laundry.  
Use special products to remove  
the stubborn stains.  
Incorrect temperature  
was set.  
Make sure that you set the cor-  
rect temperature.  
Too much laundry load.  
Decrease the laundry load.  
After the check, activate the appliance.  
The programme continues from the point  
of interruption.  
If the display shows other alarm codes,  
contact the service centre.  
If the problem occurs again, contact the  
service centre.  
TECHNICAL INFORMATION  
Dimensions  
Width / Height / Depth  
Voltage  
Overall power  
Fuse  
Frequency  
400 / 850 / 600 mm  
Electrical connection:  
230 V  
2200 W  
10 A  
50 Hz  
Water supply pressure  
Minimum  
Maximum  
0,5 bar (0,05 MPa)  
8 bar (0,8 MPa)  
Cold water  
1)  
Water supply  
Maximum load  
Spin speed  
Cotton  
6 kg  
Maximum  
1200 rpm (L60260TL)  
1000 rpm (L60060TL)  
1)  
Connect the water inlet hose to a water tap with a 3/4'' thread.  
 
ENGLISH  
23  
INSTALLATION  
UNPACKING  
1.  
Remove the external film. If necessa-  
ry, use a cutter.  
2.  
Remove the polystyrene packaging  
materials.  
3.  
4.  
Tilt the appliance backwards.  
Turn the appliance on one of the cor-  
ners to remove the protection from  
the bottom.  
5.  
6.  
7.  
Open the lid.  
Remove the polystyrene piece.  
Open the drum and remove all the  
items.  
 
24  
8.  
Remove the power supply cable and  
the drain hose from the hose holders.  
9.  
Remove the three bolts.  
2
1
10.  
11.  
Remove the plastic piece.  
Replace the plastic spacer with the  
plastic cap. You can find this cap in  
the user manual bag.  
1
1
2
12.  
To install the appliance at the same  
level as neighbouring furniture, cut  
these plastic pieces.  
 
ENGLISH  
25  
WARNING!  
We recommend that you keep the  
packaging and the transit bolts for  
when you move the appliance.  
Remove all the packaging and the  
transit bolts before you install the  
appliance.  
POSITIONING AND LEVELLING  
1.  
2.  
Pull the lever from right to left.  
When the position of the appliance is  
right, put back the lever.  
3.  
4.  
Install the appliance on a flat hard  
floor.  
Make sure that carpets do not stop  
the air circulation below the appli-  
ance.  
A
5.  
6.  
Make sure that the appliance does  
not touch the wall or other units.  
Loosen the feet to adjust the level.  
Measure with a spirit level. Tighten  
the pieces A.  
7.  
A correct adjustment of the appli-  
ance level prevents the vibration,  
noise and the movement of the ap-  
pliance when in operation.  
• The appliance must be level and stable.  
CAUTION!  
Do not put cardboard, wood or  
equivalent materials below the  
appliance feet to adjust the level.  
 
26  
THE INLET HOSE  
1.  
Connect the hose to the appliance.  
Loose the ring nut to set it in the cor-  
rect position.  
90˚  
2.  
Connect the water inlet hose to the  
cold water tap with 3/4 thread.  
CAUTION!  
Make sure that there are no leaks  
from the couplings.  
Do not use an extension hose if  
the inlet hose is too short. Contact  
the service centre for the replace-  
ment of the inlet hose.  
Water-stop device  
The inlet hose has a water stop device.  
This device prevents water leaks in the  
hose because of its natural ageing. The  
red sector in the window «A» shows this  
fault .  
If this occur, close the water tap and con-  
tact the service centre to replace the  
hose.  
A
WATER DRAINAGE  
There are different procedures to connect  
the drain hose:  
 
ENGLISH  
27  
With the plastic hose guide.  
• On the edge of a sink.  
• Make sure that the plastic guide cannot  
move when the appliance drains. At-  
tach the guide to the water tap or the  
wall.  
• To a stand pipe with vent-hole.  
Refer to the illustration. Directly into a  
drain pipe at a height of not less than  
70 cm and not more than 100 cm. The  
end of the drain hose must always be  
ventilated , i.e. the inner diameter of  
the drainpipe must be larger than the  
external diameter of the drain hose.  
Without the plastic hose guide.  
• To a sink spigot.  
Refer to the illustration. Put the drain  
hose in the spigot and tighten it with a  
clip. Make sure that the drain hose  
makes a loop to prevent that remaining  
particles go in the appliance from the  
sink.  
 
28  
• Directly to a built-in drain pipe in the  
room wall and tighten it with a clip.  
You can extend the drain hose to  
maximum 400 cm. Contact the  
service centre for the other drain  
hose and the extension.  
 
ENGLISH  
29  
 
30  
 
ENGLISH  
31  
 
108616700-B-472011  
 

3Com Network Card 09 1457 000 User Manual
Aiphone MP3 Player Accessories MYW P1L User Manual
Aiwa Stereo System NSX D23 User Manual
Alliance Laundry Systems Washer EC001F User Manual
Allied Telesis Network Card AT WCU200G User Manual
American Dryer Corp Clothes Dryer AD 76 User Manual
Asus Clock Radio P4S800D X User Manual
Atlona Switch AT HDMI V41 User Manual
ATN Binoculars Binocular User Manual
Behringer Stereo System CMD MM 1 User Manual